Key Benefits: Cures At 270 ° ÂF Soft Hand Prints Universal For Variety Of Fabrics Low Bleed For Poly Blends Non-Phthalate - Eco-friendly Formula Highly Opaque Short Body Semi-Gloss Rapid Cure Army Green Screen Printing Plastisol Inkby Screen Print Direct® is a premium plastisol ink that cures as low as 270°. Rapid Cure Plastisol Ink is the best plastisol ink for screen printing when working with a variety of materials. This low bleed ink works great with a wide variety of blends including polyester. Say goodbye to garment shrinking and scorching with low-temperature cure fabric ink. The ink's lower cure temp saves production time and helps ensure the garment is cured properly without expensive conveyor dryers. The ink's texture is creamy and short-bodied. The color is vibrant, bold, and opaque. For darker garments, we recommend printing with an under-base. For more information on low-temperature cure inks take a look at the blogs we have below. Low-Temperature Cure Inks For Dummies Low-Temperature Cure Inks For Dummies Volume 2 Plastisol Ink Prep Disclaimer: All colors are approximate and will vary from monitor to monitor. Curing: Cure at 132° C/270° F Flash at 82-104° C/180-200°F Flash and Curing Guidelines:Generally it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured. General Testing: ÂBefore you do any large print, we recommend doing a stretch test and a wash test to ensure you are cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton. Clean-Up: On the press - Ecotex® Screen Printing Plastisol Press Wash/Ink Degradant In the sink - Ecotex® Screen Printing Plastisol Screen Wash/Ink Degradant ✔️ Pro Tips:Plastisol inks do not dye fabric like the traditional inks. Plastisol inks wrap around the fibers and make a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container. We highly recommend printing with an under base white when printing on a dark garment Click Here For Safety Data Sheet Click Here for Rapid Cure Color Guide and Hex Codes